ZyXEL Communications MES-2110 User Manual page 191

Table 80 Configuration Mode Commands
COMMAND
no dhcp smart-relay option
no dhcp smart-relay vlan <cr|range>
no dhcp snooping enable
no dhcp smart-relay exlude-vlan <1-4094>
no dhcp snooping option
no dhcp snooping vlan <1-4094>
no dot1x global
no dot1x guest-vlan
no gateway
no igmp immediate-leave
no igmp query-mode <vlan-id>
no igmp snooping
no igmp static
no igmp vlan <1-4094>
no ip
no lacp
no logins
no mvr <1-4094>
no netmask
no spanning-tree
no trunk <group-id>
no vlan <2-4094>
no vlan-stacking
qinq-sp-tpid <tpid>
qos schedule all_high_before_low
qos schedule weighted_round_robin
MES-2110 User's Guide
Chapter 23 Command Line Interface
DESCRIPTION
Disables the DHCP smart relay option.
Sets the DHCP smart relay to exclude VLANs.
: Leave this field blank and press [Enter] to
cr
use the default setting.
: Specify a range of VLAN IDs.
range
Disables DHCP snooping.
Sets the DHCP smart relay to include the
previously excluded specified VLAN.
Disables the DHCP snooping option.
Disables the specified DHCP snooping VLAN ID.
Stops 802.1x running globally
Disables Guest VLAN.
Sets the device's default gateway.
Sets IGMP fast leave to its default value.
Sets IGMP query mode to its default type for the
specified VLAN ID.
Disables IGMP snooping.
Disables the IGMP static port.
Disables IGMP VLAN for the specified VLAN ID.
Sets the device to its default IP address.
Note: You cannot change the device's IP
address over Telnet.
Disables LACP.
Resets the login password to NULL.
Removes an MVR configuration from the
specified VLAN.
Sets the default netmask.
Disables the spanning tree.
Disables the trunk group.
Deletes the static VLAN entry.
Disables VLAN stacking.
Sets the SP TPID. SP TPID is a standard
Ethernet type code identifying the frame and
indicating whether the frame carries IEEE
802.1Q tag information.
: Enter the Server Provider Tag Protocol
tpid
Identifier. This can be a four-digit hexadecimal
number from 0000 to ffff. The default is 9100.
Sets the QoS schedule to all high before low.
Sets the QoS to weighted round_robin.
191