ZyXEL Communications MES-2110 User Manual page 189

Intelligent layer 2 switch
Hide thumbs Also See for MES-2110:
Table of Contents

Advertisement

Table 80 Configuration Mode Commands
COMMAND
erase-mac-table
frame-size <1522|1632>
gateway <ip-address>
hdos ip <index> <ip-address>
hdos ip-enable <index> <enable|disable>
hdos protection <enable|disable>
igmp immediate-leave <port-list>
igmp query-mode <auto|disable>
igmp snooping
igmp static <port-list>
igmp vlan <1-4094>
igmp vlan-mode <auto|fixed>
igmp vlan-query-mode <vlan-id>
<auto|disable>
ip <ip-address>
lacp group <group> <lacp|static>
lacp hash-mode <xor|lookup>
MES-2110 User's Guide
Chapter 23 Command Line Interface
DESCRIPTION
Erases all dynamic MAC entries from the MAC
table.
Sets the frame size. The default is 1632.
Sets the gateway IP address.
Sets the acceptable IP address for Host Denial
of Service (DoS) protection.
: Enter an index number (1-5).
index
: Enter an IP address to associate
ip-address
with an index number.
Enables or disables an individual IP address for
Host Denial of Service (DoS) protection.
: Enter an index number (1-5).
index
: Enable or disable the IP
enable|disable
address associated with this index number.
Enables or disables the Host Denial of Service
(DoS) protection service.
Sets the port list for IGMP immediate-leave.
Sets the IGMP query mode.
Enables IGMP snooping.
Sets the IGMP static port list.
Specifies the VLANs on which to perform IGMP
snooping if the mode is fixed.
Specifies how the VLANs snooped by the device
select IGMP packets.
: The device learns multicast group
auto
membership on any VLAN. It drops a.ny IGMP
control messages on other VLANs after it
reaches this maximum number (auto mode).
: The device only learns multicast group
fixed
membership on specified VLAN(s). It drops any
IGMP control messages for any unspecified
VLANs (fixed mode).
Specifies the query mode for the specified VLAN.
Sets the IP address of the device to the one
specified.
Sets the specified trunk group to LACP or static.
Sets the hash mode for trunk load balancing
selection.
: Select this XOR the lower 3 bits of the DA
xor
and SA frames together.
: Select this to use the lookup table.
lookup
189

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es-100

Table of Contents