The Lock Mac Address Learning Screen - ZyXEL Communications MES-2110 User Manual

Intelligent layer 2 switch
Hide thumbs Also See for MES-2110:
Table of Contents

Advertisement

Table 56 Configuration > MAC Menu > MAC Table Status
LABEL
Undo
Apply
MAC Table Status
No.
MAC Address
Static
Priority
1-10
Page Up/Down

20.3 The Lock MAC Address Learning Screen

Use this screen to configure the MAC address learning settings. Click
Configuration > MAC Menu > Lock Learning MAC to open the following
screen.
Figure 72 Configuration > MAC Menu > Lock Learning MAC
MES-2110 User's Guide
DESCRIPTION
Click this to load your last saved settings.
Click Apply to save your changes to the ZyXEL Device's run-time
memory. The ZyXEL Device loses these changes if it is turned off
or loses power, so use the Save Settings link in the navigation
panel to save your changes to the non-volatile memory.
This is the incoming frame index number.
This is the MAC address of the device from which this incoming
frame came.
This shows whether the MAC address is dynamic (learned by the
MES-2110) or static (manually configured).
This shows the priority level of the MAC address
This shows the port from which the MAC address was learned.
Click this to view the previous or next page.
Chapter 20 MAC
153

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es-100

Table of Contents