Mes-2110 Access And Login - ZyXEL Communications MES-2110 User Manual

Chapter 24 Troubleshooting
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
page 35.
Check the hardware connections. See
2
Inspect your cables for damage. Contact the vendor to replace any damaged
3
cables.
Disconnect and re-connect the power adaptor or cord to the MES-2110.
4
If the problem continues, contact the vendor.
5

24.2 MES-2110 Access and Login

I forgot the IP address for the MES-2110.
The default IP address is 192.168.1.1.
1
Use the console port to log in to the MES-2110.
2
If this does not work, you have to reset the device to its factory defaults. See
3
Section 5.6 on page
I forgot the username and/or password.
The default username is admin and the default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
Section 5.6 on page
208
Section 24.1 on page
59.
59.
Section 3.4 on
207.
MES-2110 User's Guide