ZyXEL Communications MES-2110 User Manual page 130

Chapter 17 IGMP
Note: Your MES-2110 automatically creates a static VLAN (with the same VID) when
you create a multicast VLAN in this screen.
Figure 59 Configuration > IGMP Menu > MVR
The following table describes the related labels in this screen.
Table 49 Configuration > IGMP Menu > MVR
LABEL
MVR
Active
Name
Multicast VLAN
ID
Query Mode
Mode
130
DESCRIPTION
Select this check box to enable MVR to allow one single multicast VLAN
to be shared among different subscriber VLANs on the network.
Enter a descriptive name (up to 32 printable ASCII characters) for
identification purposes.
Enter the VLAN ID (1 to 4094) of the multicast VLAN.
Choose Auto to have the MES-2110 select the querier automatically, or
Disable to turn this feature off.
Specify the MVR mode on the MES-2110. Choices are Dynamic and
Compatible.
Select Dynamic to send IGMP reports to all MVR source ports in the
multicast VLAN.
Select Compatible to set the MES-2110 not to send IGMP reports.
MES-2110 User's Guide