Chapter 2 Hardware Installation and Connection
2.3.3 Mounting the MES-2110 on a Rack
Position a mounting bracket (that is already attached to the MES-2110) on one
1
side of the rack, lining up the two screw holes on the bracket with the screw holes
on the side of the rack.
Figure 8 Mounting the MES-2110 on a Rack
Using a #2 Philips screwdriver, install the M5 flat head screws through the
2
mounting bracket holes into the rack.
Repeat steps
3
the rack.
28
1
and
2
to attach the second mounting bracket on the other side of
MES-2110 User's Guide