Dhcp Relay Configuration - ZyXEL Communications MES-2110 User Manual

Chapter 18 DHCP Relay Configuration
Table 51 Relay Agent Information
FIELD LABELS
VLAN ID
Remote ID

18.2 DHCP Relay Configuration

This screen allows you to configure the DHCP Relay Agent, which sends messages
between DHCP clients and DHCP servers on different IP networks.
Click Configuration > DHCP Relay Configuration to open this screen.
Figure 65 Configuration > DHCP Relay Configuration
The following table describes the labels in this screen.
Table 52 Configuration > DHCP Relay Configuration
LABEL
DHCP Relay Agent Configuration
Active
Remote DHCP Server
Smart Relay Exclude
VLAN
Option82
138
DESCRIPTION
(2 bytes) This is the VLAN that the port belongs to.
(up to 64 bytes) This optional field is set on the DHCP Relay
Configuration (Section 19.2 on page
DESCRIPTION
Select this check box to enable DHCP relay.
Enter the IP address of a DHCP server in dotted decimal notation.
Enter the VLAN ID to exclude from the DHCP relay function.
Select this to have the MES-2110 add information (slot number,
port number and VLAN ID) to client DHCP requests that it relays
to a DHCP server.
143) screen
MES-2110 User's Guide