ZyXEL Communications MES-2110 User Manual page 106

Chapter 12 VLAN
Table 34 Configuration > VLAN Menu > Tag-Based > VLAN Stacking
LABEL
SPVID
Priority
Undo
Apply
VLAN Stacking Status
Port1-10
Active
SP TPID
Role
SPVID
Priority
106
DESCRIPTION
SPVID is the service provider's VLAN ID (the outer VLAN tag).
Enter the service provider ID (from 1 to 4094) for frames received
on this port.
On the MES-2110, configure priority level of inner IEEE 802.1Q
tag in the Configuration > QoS Menu > 802.1p Priority
screen.
"0" is the lowest priority level and "7" is the highest.
Click this to restore your last saved settings.
Click Apply to save your changes to the MES-2110's run-time
memory. The MES-2110 loses these changes if it is turned off or
loses power, so use the Save Settings link in the navigation
panel to save your changes to the non-volatile memory when you
are done configuring.
This is the port number.
This shows whether VLAN stacking is enabled or disabled on the
MES-2110.
This is the service provider VLAN tag.
This shows how the port process transmitted frames.
This is the service provider ID for frames received on this port.
This shows the priority level of frames transmitted through the
port.
MES-2110 User's Guide