ZyXEL Communications MES-2110 User Manual page 187

Table 80 Configuration Mode Commands
COMMAND
arp inspection enable
arp inspection vlan <1-4094>
arp inspection vlan-mode <all|fixed>
arp inspection mac-filter-aging <0-10080>
console-baudrate <9600|19200|38400>
console-timeout <0|10~3600>
dhcp binding <mac-address> <ip-address>
<port> <vlan-id>
dhcp client
dhcp option-information <remote-id>
dhcp smart-relay enable
dhcp smart-relay exlude-vlan <1-4094>
dhcp smart-relay helper-address <ip-
address>
dhcp smart-relay option
dhcp snooping enable
dhcp snooping vlan <1-4094>
dhcp snooping vlan-mode <all|fixed>
dhcp snooping option
MES-2110 User's Guide
Chapter 23 Command Line Interface
DESCRIPTION
Enables ARP inspection.
Note: You must still enable ARP inspection
on specific VLAN and specify trusted
ports if you use this option.
Sets the ARP inspection VLAN ID.
Sets the ARP inspection VLAN mode.
Specifies how long (in minutes) MAC address
filters remain in the device after it identifies an
unauthorized ARP packet.
The device automatically deletes the MAC
address filter afterwards. Use '0' in the
parameter field to make it permanent.
Sets the console port's baudrate.
Sets the console timeout in seconds.
: Sets the console to never timeout
0
: Sets the console timeout in seconds
10~3600
(minimum 10 seconds, maximum 3600 seconds,
default 300 seconds.)
Adds the specified MAC address, IP address,
port numer, and VLAN ID to the DHCP snooping
static binding table.
Enables DHCP client.
Sets the DHCP Option Remote ID.
: Enter a maximum of 64
remote-id
characters.
Enables DHCP smart relay.
Sets the DHCP smart relay to exlude the
specified VLAN.
Sets the IP address of the DHCP server.
: Enter the IP address of the
ip-address
remote server.
Allows the device to add DHCP relay agent
information.
Enables DHCP snooping.
Sets the DHCP snooping VLAN ID.
Sets the DHCP snooping VLAN mode.
: Enter this to have the device enable DHCP
all
snooping on all VLANs dynamically.
: Enter this to specify which VLANS can
fixed
be enabled with DHCP snooping.
Allows the device to add the DHCP option.
187