ZyXEL Communications MES-2110 User Manual page 139

Table 52 Configuration > DHCP Relay Configuration (continued)
LABEL
Option82 Information
Undo
Apply
DHCP Relay Agent Status
Active
Remote DHCP server
Smart-Relay Exclude
VLAN
Option82
Option82 Information
MES-2110 User's Guide
DESCRIPTION
Enter a unique identifier (such as the MES-2110's MAC address)
for the DHCP relay agent. This must be globally unique. You can
enter up to 64 ASCII characters.
Click this to reset the values in this screen to their last-saved
values.
Click Apply to save your changes to the MES-2110's run-time
memory. The MES-2110 loses these changes if it is turned off or
loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are
done configuring.
This indicates whether DHCP relay is enabled or disabled.
This indicates the remote DHCP server's IP address.
This indicates which VLAN IDs are excluded from the DHCP relay
function.
This indicates whether Option82 is enabled or disabled.
This indicates the remote ID of the DHCP relay agent.
Chapter 18 DHCP Relay Configuration
139