ZyXEL Communications MES-2110 User Manual page 110

Chapter 12 VLAN
port. Click Configuration > VLAN Menu > Tag-Based > Management VLAN
to open the following screen.
Figure 45 Configuration > VLAN Menu > Tag-Based > Management VLAN
The following table describes the labels in this screen.
Table 37 Configuration > VLAN Menu > Tag-Based > Management VLAN
LABEL
Management VLAN
VLAN ID
Undo
Apply
110
DESCRIPTION
This is the current management VLAN.
Enter an ID number from 1 to 4094. 1 is the default value. If you
change this, you will be disconnected from the web configurator
unless your current access belongs to the new VLAN.
Click this to restore your last saved settings.
Click Apply to save your changes to the MES-2110's run-time
memory. The MES-2110 loses these changes if it is turned off or
loses power, so use the Save Settings link in the navigation
panel to save your changes to the non-volatile memory when you
are done configuring.
MES-2110 User's Guide