Chapter 19 IP Source Guard
Click IP Source Guard > ARP Inspection > ARP Inspection Config to open
the following screen.
Figure 69 Configuration > ARP Inspection
The following table describes the labels in this screen.
Table 55 Configuration > ARP Inspection
LABEL
ARP Inspection
Action
MAC-Filter-Aging-
Time
148
DESCRIPTION
Use this to enable or disable the ARP inspection feature.
Enter the number of minutes from 1-10080 that the MES-2110
retains MAC addresses in its MAC address table. Enter 0 to retain
addresses permanently.
MES-2110 User's Guide