Privileged Command Mode - ZyXEL Communications MES-2110 User Manual

23.6 Privileged Command Mode

When in Privileged mode, the command prompt is as follows:
MES-2110#
The following is a list of Privileged mode commands:
Table 78 Privileged Commands
COMMAND
enable
disable
copy config tftp <ip-address> <file-name>
copy firmware tftp <ip-address> <file-
name>
copy syslog tftp <ip-address> <file-name>
copy tftp command-text <ip-address> <file-
name>
copy tftp config <ip-address> <file-name>
copy tftp firmware <ip-address> <remote-
file-name>
reset default
reset system
show abnormal
show arp inspection <config|status>
show bandwidth-control
show cable <all|port-number>
show 8021p-priority
show console-baudrate
show console-timeout
show dhcp smart-relay
show dhcp snooping
MES-2110 User's Guide
Chapter 23 Command Line Interface
DESCRIPTION
Turns on Privileged mode commands.
Turns off Privileged mode commands, returning
the device to Basic mode.
Uploads a configuration file from the specified
TFTP server's IP address.
Uploads a firmware file from the specified TFTP
server's IP address.
Uploads a syslog file from the specified TFTP
server's IP address.
Downloads a command file from the specified
TFTP server's IP address.
Downloads a configuration filefrom the specified
TFTP server's IP address.
Downloads a firmware file from the specified
TFTP server's IP address.
Resets the device to its factory default settings.
Resets the system.
Displays the abnormal traffic detection
configuration.
Displays ARP inspection information.
: Displays the ARP inspection
config
configuration file.
: Displays the ARP inspection records.
status
Diplays the bandwidth control information.
Displays the cable test results. Select all to view
all test result or test by a specific port number.
Displays the 8021p priority configuration for all
ports.
Displays the baud rate of the console port.
Displays the number of idle seconds allowed on
the console port before the device automatically
terminates the session.
Displays DHCP smart relay information.
Displays DHCP snooping information.
.
183