ZyXEL Communications MES-2110 User Manual page 82

Chapter 10 802.1x
Table 17 Configuration > Port Configuration (continued)
LABEL
Guest VLAN
Reauthenticat
ion
Reauth-Period
(1-999999)
Port
Active
Guest VLAN
Reauthenticat
ion
Reauth-Period
(1-999999)
Undo
Apply
82
DESCRIPTION
You can configure this if you have enabled the guest VLAN feature in the
Configuration > Global Configuration screen
page 79 .
)
Select Enable then enter the number that identifies the Guest VLAN.
Make sure this is the Guest VLAN recognized in your network.
Clients belonging to the guest VLAN can access unprotected areas in your
network, such as the Internet.
Select Disable if you do not want to use this feature.
Enable this if a subscriber has to periodically re-enter his or her username
and password to stay connected to the port.
Specify how often (in minutes) a client has to re-enter his or her
username and password to stay connected to the port.
Default is 3600 minutes (or 1 hour).
This indicates the port number.
This indicates whether 802.1x authentication is enabled or disabled for
this port.
This indicates whether Guest VLAN is enabled or disabled for this port.
This indicates whether Reauthentication is enabled or disabled for
this port.
This indicates the Reauth-Period for the this port.
Click this to restore your last saved settings.
Click Apply to save your changes to the MES-2110's run-time memory.
The MES-2110 loses these changes if it is turned off or loses power, so
use the Save Settings link in the navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Section 10.2 on
(see
MES-2110 User's Guide