The 802.1P Priority Table - ZyXEL Communications MES-2110 User Manual

Chapter 21 QoS

21.3 The 802.1p Priority Table

Use this screen to assign a priority level for each port. Click Configuration > QoS
Menu > 802.1p Priority to open the following screen.
Figure 76 Configuration > QoS Menu > 802.1p Priority
The following table describes the labels in this screen.
Table 61 Configuration > QoS Menu > 802.1p Priority
LABEL
Port
Priority
Undo
Apply
160
DESCRIPTION
This label shows the port you are configuring.
Assign a priority level to the port.
Click this to load your last saved settings.
Click Apply to save your changes to the ZyXEL Device's run-time
memory. The ZyXEL Device loses these changes if it is turned off
or loses power, so use the Save Settings link in the navigation
panel to save your changes to the non-volatile memory.
MES-2110 User's Guide