ZyXEL Communications MES-2110 User Manual page 146

Chapter 19 IP Source Guard
new static binding replaces the original one. Click Configuration > DHCP
Snooping > DHCP Binding Table to open the following screen.
Figure 67 Configuration > DHCP Snooping > DHCP Binding Table
The following table describes the labels in this screen.
Table 54 Configuration > DHCP Snooping > DHCP Binding Table
LABEL
DHCP Binding Configuration
MAC Address
IP Address
Port
VLAN ID
Undo
Add
Static/Dynamic Binding Table
No.
Port
VLAN ID
MAC Address
IP Address
Delete
Lease Time
(DD:HH:MM)
146
DESCRIPTION
Enter the source MAC address in the binding.
Enter the IP address assigned to the MAC address in the binding.
Specify the port in the binding.
Specify a VLAN ID if you want the MES-2110 to forward DHCP
frames to DHCP servers on a specific VLAN.
Leave the field blank if you do not want the MES-2110 to forward
DHCP frames to a specific VLAN.
Click this to restore your last saved settings
Click this to add the rule to the MES-2110.
This field displays a sequential number for each binding.
This field displays the port number in the binding.
This field displays the source VLAN ID in the binding.
This field displays the source MAC address in the binding.
This field displays the IP address assigned to the MAC address in
the binding.
Click this to delete a static binding rule.
This field displays how many days, hours and minutes the binding
is valid; for example, 02:03:04 means the binding is still valid for
2 days, 3 hours and 4 minutes.
MES-2110 User's Guide