Outgoing Traffic Bandwidth - ZyXEL Communications MES-2110 User Manual

4.6 Outgoing Traffic Bandwidth

This tutorial shows you how to set the outgoing traffic bandwidth limit to 1 Mbps
for Port 2.
To configure outgoing traffic bandwidth:
Open the Configuration > Bandwidth Control screen.
1
Set the Port Number to Port 2.
2
In the Egress row, set the Rate Level to 1M~100M (1M+), the Rate Limit to
3
1000 k, and the Active option to Enable.
Click Apply.
4
Click Save Settings in the navigation panel to store the changes permanently.
5
MES-2110 User's Guide
2
3
Chapter 4 Tutorials
1
4
47