Troubleshooting; Chapter 24 Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications MES-2110 User Manual

C
H A P T E R
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
•

Power, Hardware Connections, and LEDs

• MES-2110 Access and Login
• MES-2110 Configuration and Console
24.1 Power, Hardware Connections, and LEDs
The MES-2110 does not turn on. None of the LEDs turn on.
Make sure you are using the power adaptor or cord included with the MES-2110.
1
Make sure the power adaptor or cord is connected to the MES-2110 and plugged
2
in to an appropriate power source. Make sure the power source is turned on.
Disconnect and re-connect the power adaptor or cord to the MES-2110.
3
If the problem continues, contact the vendor.
4
The ALM LED is on.
Disconnect and re-connect the power adaptor or cord to the MES-2110.
1
If the problem continues, contact the vendor.
2
MES-2110 User's Guide

Troubleshooting

24
207