Attributes Used For Authentication - ZyXEL Communications MES-2110 User Manual

Refer to RFC 2865 for more information about RADIUS attributes used for
authentication. Refer to RFC 2866 and RFC 2869 for RADIUS attributes used for
accounting.
This section lists the attributes used by authentication and accounting functions on
the MES-2110. In cases where the attribute has a specific format associated with
it, the format is specified.

10.6.3 Attributes Used for Authentication

The following sections list the attributes sent from the MES-2110 to the RADIUS
server when performing authentication.
10.6.3.1 Attributes Used for Authenticating Privilege Access
User-Name
- The format of the User-Name attribute is $enab#$, where # is the privilege
level (1-14).
User-Password
NAS-Identifier
NAS-IP-Address
10.6.3.2 Attributes Used to Login Users
User-Name
User-Password
NAS-Identifier
NAS-IP-Address
10.6.3.3 Attributes Used by the IEEE 802.1x Authentication
User-Name
NAS-Identifier
NAS-IP-Address
NAS-Port
NAS-Port-Type
- This value is set to Ethernet(15) on the MES-2110.
Calling-Station-Id
Frame-MTU
EAP-Message
State
Message-Authenticator
MES-2110 User's Guide
Chapter 10 802.1x
85