Mvr Command Example - ZyXEL Communications MES-2110 User Manual

Chapter 23 Command Line Interface
Table 81 MVR-Configuration Mode Commands
COMMAND
mode <dynamic|compatible>
name <name>
query-mode <auto|disable>
receiver-port <port-list>
source-port <port-list>
tagged <port-list>

23.8.1 MVR Command Example

This example configures MVR in the following ways:
Enters MVR mode. This creates a multicast VLAN with the name StreamVlan and
1
the multicast VLAN ID of 100.
Specifies source port 9 for the multicast group.
2
Specifies receiver ports 1-4 and 10 for the multicast group.
3
Specifies dynamic mode for the multicast group.
4
Sets the ports 9 and 10 to tag VLAN IDs.
5
Configures MVR multicast group addresses 227.3.3.1 through 227.3.3.10 for
6
multicast group ID 1.
MES-2110(config)# mvr 100
MES-2110(config-mvr)# no inactive
MES-2110(config-mvr)# name StreamVlan
MES-2110(config-mvr)# mode dynamic
MES-2110(config-mvr)# receiver-port 1,2,3,4,10
MES-2110(config-mvr)# source-port 9
MES-2110(config-mvr)# tagged 9,10
MES-2110(config-mvr)# group 1 227.3.3.1 10
196
DESCRIPTION
Sets the MVR mode to dynamic or compatible for
the current MVR group.
Sets the current MVR group name for
identification purposes.
: Enter 1-30 characters.
name
Sets the query mode of the current MVR group.
Sets the receiver port(s) for the current MVR
group. An MVR receiver port can only receive
multicast traffic in a multicast VLAN.
Sets the source port(s) for the current MVR
group. An MVR source port can send and receive
multicast traffic in a multicast VLAN.
Sets the port(s) to VLAN tags for the current
MVR group.
MES-2110 User's Guide