Installing The Frames - IBM Multiprise 3000 S/390 Installation Manual

Installing the Frames

1 Removing the packing material
1. Remove all of the tape and packing
material from the outside of each frame
(save shipping materials and container).
2. Inventory the components.
3. Remove all of the tape and packing
material from the inside of each frame.
2 Preparing the frames
1. Position each frame according to the
customer floor plan.
There can be a maximum of three
frames to a 7060 String.
The first frame contains the CPC and
the Support Element.
The second frame can be a:
a. I/O 01 a channel and DASD cage.
The third cage can only be a:
a. I/O 02 a DASD cage only.
EPO EPO
Switch Switch
Top Top
View View
DASD only I/O - DASD
Cabinet Cabinet
(Cabinet 3) Cabinet 1)
Rear
521 mm 521 mm
(20.5 in) (20.5 in)
89 mm 89 mm
(3.5 in) (3.5 in)
EPO
Switch
Top
View
Processor
Cabinet
(Cabinet 2)
Rear
762 mm 521 mm
(30 in) (20.5 in)
3264 mm
(128.5 in)
762 mm
(30 in)
Chapter 1. Beginning the Installation
1-7