Licensed Internal Code Changes (Support Element)
1 Read this before proceeding
During installation, you should insure that your
system has all the necessary changes to the
licensed internal code. It is recommended that you
obtain a System Update Level (SUL) Tape
cartridge which contains changes to the licensed
internal code. The procedure that follows provides
you with instructions for retrieving and installing all
the changes to the internal code for each Support
Element.
If there are new internal code changes available, or
if you are not sure if there are any new internal
code changes available, go to "Retrieving Internal
Code Changes (Support Element)" on page 5-16
If there are no new changes available, go to
"Internal DASD Subsystem Configuration" on page
7-1
5-15
Chapter 5. I/O and Support Processor Installation