Table of Contents
Advertisement
2 Select for Activation
From the Cryptographic Coprocessor window
1. Select a CP from the list.
2. Select Select for next activation
3. Select the drop down arrow to select a
Cryptographic Configuration.
4. Check Auto initialize
5. Select Save
6. Select Enter
7. Select OK
8. Repeat this process until all Cryptographic
Coprocessor activations have been saved.
9. Remove the diskette from the "A" drive.
10. Select Cancel to exit Cryptographic
Configuration.
Advise the customer to store the diskette in
a secure area.
11. If working from an Hardware Management
Console with multiple CPC defined return
to "Establishing a CPC Console
Connection" on page 6-26 and repeat until
all Cryptographic Coprocessor
Configurations have been saved.
6-28
Installing the System
Note: Inform the customer that the cryptographic
coprocessor configurations have been
loaded and queued for the next activation.
It is the customers responsibility to load the
keys.
Note: Additional information on cryptographic
function once the customer has loaded the
keys is available in Support Element
Operations Guide GC38-0608
Note: If this system order includes a TKE
(Trusted Key Entry) terminal consult TKE
Workstation Maintenance
InformationSY24-6159 for installation of the
workstation.
Advertisement
Table of Contents
