Table of Contents
Advertisement
Customizing Dialing Information
Skip this procedure if your system has been pre-configured
1 Customizing the remote service facility
From the Support Element Workplace panel.
1. Open Console Actions from the Views
area
2. Open Customizing Dialing Information
from the Console Actions Work Area
Important
Refer to the corresponding pages in the
Resource Link WEB Site for the data
that you will enter on these panels.
3. Activate Enable remote service
4. Activate Authorize automatic service call
reporting only if the customer wants this
option. The customer must decide if he
wants to allow automatic service call
reporting. Refer to the help panel if
necessary for more information.
5. Type the information on these panels as
required.
6. Select Finish from the second panel.
7. Select Continue
Chapter 5. I/O and Support Processor Installation
5-13
Advertisement
Table of Contents
