Table of Contents
Advertisement
Enabling Support Element Services
Skip this procedure if your system has been pre-configured or if you have a
pre-configuration diskette.
Note: If your system has been pre-configured it will be indicated by a sticker
1 The Facility
This facility allows your system to automatically
report problems to IBM. It also allows you to
receive the latest licensed internal code changes
from the IBM Service Support System.
If you do not have the proper
telecommunications equipment defined to use
this facility or if the customer does not
authorize you to use this facility, go to
"Enabling Service Status" on page 5-12.
attached to the Support Element.
Chapter 5. I/O and Support Processor Installation
5-9
Advertisement
Table of Contents
