Table of Contents
Advertisement
Remote Customization (Support Element)
Skip this procedure if your system has been pre-configured or if you have a pre-configuration
diskette and go to "Licensed Internal Code Changes (Hardware Management Console)" on
page 6-16.
1 Customizing the remote service facility
From the Hardware Management Console
Workplace panel.
1. Open Task List from the Views area
2. Open CPC Remote Customization from
the Task List Work Area
3. Open Groups from the Views area
4. Open Defined CPC's from the Groups
Work Area
5. Select all the CPC's you want to customize
at one time.
6. Drag and drop the selected objects on
Remote Service in the CPC Remote
Customization area.
2 Authorizing remote service
The Remote Service panel displays.
Important
Refer to the corresponding pages in the
Resource Link WEB Site for the data that you
will enter on these panels.
1. Type the information on this panel as
required.
2. Activate Enable remote service
3. Activate Authorize automatic service call
reporting only if the customer wants this
option. The customer must decide if he
wants to allow automatic service call
reporting. Refer to the help panel if
necessary for more information.
4. Select Save
The Remote Service Customization
Confirmation panel displays.
5. Select Save
6. Select OK
6-14
Installing the System
Advertisement
Table of Contents
