Table of Contents
Advertisement
3 Entering remote service account information
From the Hardware Management Console
Workplace panel.
1. Select all the CPC's you want to customize
at one time.
2. Drag and drop the selected objects on
Account Information in the CPC Remote
Customization area.
4 Entering the information
A message should appear stating initializing with
information from Hardware Management Console.
Ensure information is correct.
The Account Information panel displays.
Important
Refer to the corresponding pages in the
Resource Link WEB Site for the data that you
will enter on these panels.
1. Type the information on this panel as
required.
Use the scroll bars to see all the fields, use
the tab key to move the cursor, use the
helps (F1) if necessary, then select OK.
Note: Information messages may appear
if you did not correctly complete all
fields. Select OK to close the
message panel. The cursor will be
in the incorrect field, re-enter the
correct information, then select OK
to continue.
When all the information is entered the first
panel, select (Account) by clicking on the
tab. When all pages are completed, Select
Save.
The Account Information Customization
Confirmation panel displays.
2. Select Save.
Chapter 6. Completing the Installation
6-15
Advertisement
Table of Contents
