Table of Contents
Advertisement
2 Enable Automatic Dialing
Important
Refer to the corresponding pages in the
Resource Link WEB Site for the data that you
will enter on these panels.
From the Support Element Workplace panel.
1. Open Task List from the Views area
2. Open CPC Remote Customization from
the Task List Work Area
3. Open Groups from the Views area
4. Select CPC from the Groups Work Area
5. Drag and drop the selected objects on
Customize Automatic Dialing in the CPC
Remote Customization area.
If the phone line requires pulse dialing, a P
should be inserted in the Dial string prefix
If a prefix is needed to get an outside line
that prefix should be inserted in the Dial
string prefix.
The 7060 I/O and Support Processor you
are installing is designed to use Async
communications only. Therefore a Calling
Station Identifier is not necessary.
6. When complete select Save.
7. Drag and drop the selected object on
Account Information in the CPC Remote
Customization area.
8. Enter the account information.
9. When complete select Save.
5-10
Installing the System
Note: When a Dialing prefix is added here it is
not necessary to add the prefix to any other
dialing strings requested on the following
window. Example P9, Pulse (P) dialing is
required and the dialing string 9 is used to
get to an outside line. The comma is used
to delay dialing between the 9 and the
phone number.
Advertisement
Table of Contents
