Table of Contents
Advertisement
6 Completing the operation
Read each note before proceeding.
Note: Follow the instructions on the panels that
follow to retrieve the licensed internal code
changes.
Note: If you receive a message stating "new
internal code changes cannot be found" or
"invalid request," select OK to close the
window. There are no changes available to
retrieve. Press Esc until the Hardware
Management Console Workplace panel is
displayed. Go to "Licensed Internal Code
Changes (Support Element)" on page 6-21.
Note: If you receive a message stating "the
operation is complete," remove the optical
cartridge and select OK. Continue on the
next page to install the changes you just
retrieved.
Note:
If errors are detected during this procedure,
Double click on the highlighted message in
the Install and Activate Progress panel.
Follow the instruction given to correct the
problem, then retry this procedure.
OR
If errors are detected during this procedure,
the Hardware Messages icon will be
flashing. Correct the problem (see The
Hardware Messages icon on page 6-18),
then retry this procedure.
Note: If you have more than one Hardware
Management Console repeat this procedure
for each Hardware Management Console
6-18
Installing the System
The Hardware Messages icon
If an error occurs, the Hardware Messages icon
will flash. The message may be related to the
Hardware Management Console or one of the
Support Elements. To display the message,
follow the procedure below.
Message from a Support Element
Press Alt + Esc until the Hardware
Management Console Workplace panel is the
active window.
Open Groups from the Views area
Open Defined CPC's from the Groups
Work Area
Select the CPC's that you want.
Drag and drop the selected objects on
Hardware Messages in the Service area
If a message is displayed, take the
necessary action on the message, then
minimize the messages panel. If there are
no messages displayed, minimize the
messages panel and continue below.
Message from the Hardware Management
Console
Press Alt + Esc until the Hardware
Management Console Workplace panel
displays.
Open Groups from the Views area
Select the Hardware Management
Console object.
Drag and drop the selected object on
Hardware Messages in the Tasks area.
Open the message(s) that you want.
After taking the necessary action on the
message, minimize the messages panel.
Advertisement
Table of Contents
