RE-S-X6-128G Routing Engine Description
IN THIS SECTION
RE-S-X6-128G Routing Engine Components | 78
RE-S-X6-128G Routing Engine LEDs | 79
RE-S-X6-128G Routing Engine Boot Sequence | 81
Figure 28 on page 78
shows the Routing Engine.
Figure 28: RE-S-X6-128G Routing Engine Front View
1
Extractor clips
—
2
Auxiliary port (AUX)
—
3
Console port (CONSOLE)
—
4
Management port (MGMT)
—
5
LEDs—ONLINE, OK/FAIL, and MASTER
—
RE-S-X6-128G Routing Engine Components
In routers with dual Routing Engines, both Routing Engines must be RE-S-X6-128G Routing Engines.
Each RE-S-X6-128G Routing Engine (shown in
CPU—Runs Junos OS to maintain the routing tables and routing protocols.
EEPROM—Stores the serial number of the Routing Engine.
DRAM—Provides storage for the routing and forwarding tables and for other Routing Engine processes.
One 10-Gigabit Ethernet interface between the Routing Engine and Switch Control Board.
6
ONLINE/OFFLINE button
—
7
SSD LEDs—DISK1 and DISK2
—
8
Ports—USB1 and USB2
—
9
RESET button
—
10
SSD card slot cover
—
Figure 28 on page
78) consists of the following components:
78