Warning Statement For Norway And Sweden; Preventing Electrostatic Discharge Damage To An Mx240 Router - Juniper MX240 Hardware Manual

NOTE: To keep warranties effective, do not use a dry chemical fire extinguisher to control a fire
at or near a Juniper Networks device. If a dry chemical fire extinguisher is used, the unit is no
longer eligible for coverage under a service agreement.
We recommend that you dispose of any irreparably damaged equipment in an environmentally responsible
manner.

Warning Statement for Norway and Sweden

WARNING:
Advarsel Apparatet skal kobles til en jordet stikkontakt.
Varning! Apparaten skall anslutas till jordat nätuttag.
Preventing Electrostatic Discharge Damage to an
MX240 Router
Many router hardware components are sensitive to damage from static electricity. Some components can
be impaired by voltages as low as 30 V. You can easily generate potentially damaging static voltages
whenever you handle plastic or foam packing material or if you move components across plastic or carpets.
Observe the following guidelines to minimize the potential for electrostatic discharge (ESD) damage, which
can cause intermittent or complete component failures:
Always use an ESD wrist strap or ankle strap, and make sure that it is in direct contact with your skin.
CAUTION:
The measurement should be in the range of 1 through 10 Mohms.
When handling any component that is removed from the chassis, make sure the equipment end of your
ESD strap is attached to one of the ESD points on the chassis.
The equipment must be connected to an earthed mains socket-outlet.
For safety, periodically check the resistance value of the ESD strap.
467