Errata With The Mx240 Router Documentation - Juniper MX240 Hardware Manual

WARNING:
location. It has a separate protective earthing terminal (sized for UNC 1/4-20 ground
lugs) provided on the chassis in addition to the grounding pin of the power supply cord.
This separate protective earthing terminal must be permanently connected to earth.
CAUTION:
drape where people could trip on them.
SEE ALSO
Connecting Power to an AC-Powered MX240 Router with Normal-Capacity Power Supplies | 246
Replacing an MX240 AC Normal-Capacity Power Supply | 384
Replacing an MX240 AC Power Supply Cord | 387
MX240 AC Power Electrical Safety Guidelines and Warnings

Errata with the MX240 Router Documentation

This topic lists the outstanding issues with the documentation:
In the low-line (110 V) AC power configuration (nonredundant), two AC power supplies should be located
horizontally at the rear of the chassis in slots PEM0 and PEM1 (left to right).
SEE ALSO
Outstanding Issues with the MX240 Router | 66
The router is pluggable type A equipment installed in a restricted-access
Power cords and cables must not block access to device components or
54