Juniper MX240 Hardware Manual page 293

user@host> request vmhost snapshot partition
If only disk1 is replaced:
a. Bring the Routing Engine online by pressing the ONLINE/OFFLINE button.
b. The router boots from disk2 . To be able to boot from disk1:
user@host> request vmhost snapshot partition
Figure 90: Installing an SSD in the Routing Engine RE-S-X6-64G
1 Carrier
—
Copying vmhost and Junos OS from an USB disk when both the SSDs are replaced together:
NOTE: To prepare a bootable USB disk, see
RE-MX-X8 and RE-PTX-X8 Routing
1. Insert the USB disk in the USB slot on the Routing Engine.
2. After the Routing Engine boots from the USB, press y when you are prompted to confirm Install vmhost
and Junos software on Primary and Secondary disk [y/N]? on the console.
3. After the installation is completed, press y when prompted to confirm Reboot now? [y/N]? to reboot
from the SSD disk.
Copying vmhost and Junos OS to the SSDs from the PXEBoot server:
1. Set up the PXEBoot server. See Copying VM Host Installation Package to the PXE Boot Server.
2. Bring the Routing Engine online by pressing the ONLINE/OFFLINE button.
2 SSD card
—
Creating an Emergency Boot Device for RE-MX-X6,
Engines.
297