Replacing An Mx240 Pic; Removing An Mx240 Pic - Juniper MX240 Hardware Manual

Universal routing platform.

Hide thumbs Also See for MX240:

Table of Contents

user@host> show chassis fpc pic-status

For further description of the output from the command, see the

Replacing an MX240 PIC

Installing an MX240 PIC | 355

Removing an MX240 PIC

PICs are hot-insertable and hot-removable. When you remove a PIC, the router continues to function,

although the PIC interfaces being removed no longer function.

The PICs are located in the FPCs installed in the front of the router. A PIC weighs less than 2 lb (0.9 kg).

To remove a PIC (see

Figure 124 on page

1. Place an electrostatic bag or antistatic mat on a flat, stable surface to receive the PIC. If the PIC connects

to fiber-optic cable, have ready a rubber safety cap for each transceiver and cable.

2. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other

end of the strap to the ESD point on the chassis.

DPC 40x 1GE R

10x 1GE(LAN)

MX FPC Type 3

1x OC-192 SONET

Show Quick Links

Table of Contents