Figure 131: Removing an AS MXC
SEE ALSO
MX240 Application Services Modular Processing Card Description | 164
Preventing Electrostatic Discharge Damage to an MX240 Router | 467
Installing an MX240 AS MXC
To install an AS MXC (see
1. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other
end of the strap to the ESD point on the chassis.
2. Align the notches in the connector at the rear of the AS MXC with the notches in the AS MXC slot (slot
1—the bottom slot in the AS MLC), and then slide the AS MXC in until it lodges firmly in the AS MLC.
Figure 132 on page
376):
375