Juniper MX240 Hardware Manual page 114

2-port 10-Gigabit Ethernet DPC has two logical PICs, numbered 0 through 1.
4-port 10-Gigabit Ethernet DPC has four logical PICs, numbered 0 through 3.
For more information on specific DPCs, see
on page 119 in the MX Series Interface Module
port—Port number.
The MX240 router supports up to three DPCs that install horizontally and are numbered from bottom to
top.
Figure 33 on page 116 shows a 40-port Gigabit Ethernet DPC with SFP installed in slot 2 on the MX240
router.
Figure 33: MX240 DPC Interface Port Mapping
0 1 0 1 2
2
1
1/0
0
The DPC contains four logical PICs, numbered PIC 0 through PIC 3 in the CLI. Each logical PIC contains
10 ports numbered 0 through 9.
The show chassis hardware command output displays a 40-port Gigabit Ethernet DPC with SFP
(DPCE-R-40GE-SFP) installed in DPC slot 2. The DPC is shown as FPC 2 and the DPC's four logical PICs
— 10x 1GE(LAN) — are shown as PIC 0 through PIC 3.
user@host> show chassis hardware
...
FPC 2 REV 07
CPU REV 06
PIC 0
"DPCs Supported on MX240, MX480, and MX960 Routers"
Reference.
750-018122 KB8222
710-013713 KA9010
BUILTIN BUILTIN
DPCE 40x 1GE R
DPC PMB
10x 1GE(LAN)
116