Installation Instructions Warning; Mx240 Chassis Lifting Guidelines - Juniper MX240 Hardware Manual

Installation Instructions Warning

WARNING:
power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem met de
voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter les
directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an die
Stromquelle anschließen.
Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema a la red de
alimentación.
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.

MX240 Chassis Lifting Guidelines

The weight of a fully configured chassis is about 128 lb (58.1 kg). Observe the following guidelines for
lifting and moving the router:
Before moving the router, read the guidelines in
that the intended site meets the specified power, environmental, and clearance requirements.
Do not attempt to lift a fully configured router by yourself. Using a mechanical lift to maneuver the
router into a rack is recommended. If a lift cannot be used, a minimum of three people must lift the
router, and you must remove components from the chassis before lifting.
Read the installation instructions before you connect the device to a
"MX240 Site Preparation Checklist" on page 177
469
to verify