Table of Contents
Advertisement
Advanced commissioning
6.3 Drive control
Parameter
Number
r0046.0...31
p0857
p0858[C]
p0860
p0861
p1226[D]
p1227
p1228
For additional information on parameters, please refer to the parameter list.
6.3.2
Adapt the default setting of the terminal strips
Overview
In the converter, the input and output signals are interconnected with specific converter
functions using special parameters. The following parameters are available to interconnect
signals:
● Binectors BI and BO are parameters to interconnect binary signals.
● Connectors CI and CO are parameters to interconnect analog signals.
The following chapters describe how you adapt the function of individual converter inputs and
outputs using binectors and connectors.
186
Name
CO/BO: Missing enable signals
Power unit monitoring time
BI: Unconditionally close holding brake
BI: Line contactor feedback signal
Line contactor monitoring time
Speed threshold for standstill detection
Standstill detection monitoring time
Pulse suppression delay time
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Factory setting
-
10000 ms
0
863.1
100 ms
20 rpm
300 s
0.01 s
SINAMICS G120X converter
Advertisement
Table of Contents
