Restoring The Factory Settings; Why Restore The Factory Settings?; Resetting To Factory Setting With The Bop-2 Operator Panel - Siemens SINAMICS G120X Operating Instructions Manual

Infrastructure converter for hvac/water/wastewater

Hide thumbs Also See for SINAMICS G120X:

Table of Contents

Restoring the factory settings

Reset the converter to the factory settings in the following cases:

● You do not know the converter settings.

● The line voltage was interrupted during commissioning and you were not able to complete

commissioning.

1. Select the "DRVRESET" command from the "EXTRAS" menu

2. Confirm the reset using the OK key.

3. Wait until the converter has been reset to the factory setting.

You have reset the converter to the factory settings.

SINAMICS G120X converter

Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC

Commissioning

5.5 Restoring the factory settings