Pe Energy-Saving Properties General / Pe Properties Gen; Pe Energy-Saving Properties Mode-Dependent / Pe Properties Mod; Co/Bo: Pe Energy-Saving Active/Inactive / Pe Save Act/Inact - Siemens SINAMICS G120X Operating Instructions Manual

Parameters
7.2 Parameter list
p5611

Pe energy-saving properties general / Pe properties gen

G120X_PN Access level: 3
Can be changed: T
Unit group: -
Min:
-
Description: Sets the general properties for energy-saving.
Bit field: Bit
00
01
02
Note
Pe: PROFIenergy profiles
PROFIdrive state S4: operation
p5612[0...1]

Pe energy-saving properties mode-dependent / Pe properties mod

G120X_PN Access level: 3
Can be changed: T
Unit group: -
Min:
-
Description: Sets the mode-dependent properties for energy-saving.
Index: [0] = Reserved
[1] = Mode 2
Bit field: Bit
00
Note
Pe: PROFIenergy profiles
r5613.0...1

CO/BO: Pe energy-saving active/inactive / Pe save act/inact

G120X_PN Access level: 3
Can be changed: -
Unit group: -
Min:
-
Description: Display and binector output for the state display PROFIenergy energy saving active or inactive.
Bit field: Bit
00
01
Note
Bit 0 and bit 1 are inverse of one another.
Pe: PROFIenergy profiles
858
Signal name
Inhibit PROFIenergy control commands
Drive initiates OFF1 when transitioning to energy-saving
mode
Trans to energy-saving mode from PROFIdrive state S3/4
poss
Signal name
Reserved
Signal name
Pe active
Pe inactive
Calculated: -
Scaling: -
Unit selection: -
Max:
-
1 signal
Yes
Yes
Yes
Calculated: -
Scaling: -
Unit selection: -
Max:
-
1 signal
Yes
Calculated: -
Scaling: -
Unit selection: -
Max:
-
1 signal
Yes
Yes
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Data type: Unsigned32
Dynamic index: -
Function diagram: 2381, 2382
Factory setting:
0000 bin
0 signal FP
No -
No -
No -
Data type: Unsigned32
Dynamic index: -
Function diagram: -
Factory setting:
[0] 0110 bin
[1] 0000 bin
0 signal FP
No -
Data type: Unsigned8
Dynamic index: -
Function diagram: 2382
Factory setting:
-
0 signal FP
No -
No -
SINAMICS G120X converter