Ci: Cu Analog Outputs Signal Source / Cu Ao S_S; Cu Analog Outputs Output Value Currently Referred / Cu Ao Outp Act Ref; Cu Analog Outputs Smoothing Time Constant / Cu Ao T_Smooth - Siemens SINAMICS G120X Operating Instructions Manual

Parameters
7.2 Parameter list
p0771[0...2]

CI: CU analog outputs signal source / CU AO s_s

Access level: 2
Can be changed: T, U
Unit group: -
Min:
-
Description: Sets the signal source for the analog outputs.
Index: [0] = AO0 (X133 12/13)
[1] = AO1 (X202 85/86)
[2] = AO2 (X202 83/84)
Note
AO: Analog Output
X202: IO module terminal
r0772[0...2]

CU analog outputs output value currently referred / CU AO outp act ref

Access level: 3
Can be changed: -
Unit group: -
Min:
- [%]
Description: Displays the actual referred output value of the analog outputs.
Index: [0] = AO0 (X133 12/13)
[1] = AO1 (X202 85/86)
[2] = AO2 (X202 83/84)
Note
AO: Analog Output
X202: IO module terminal
p0773[0...2]

CU analog outputs smoothing time constant / CU AO T_smooth

Access level: 2
Can be changed: T, U
Unit group: -
Min:
0.0 [ms]
Description: Sets the smoothing time constant of the 1st order lowpass filter for the analog outputs.
Index: [0] = AO0 (X133 12/13)
[1] = AO1 (X202 85/86)
[2] = AO2 (X202 83/84)
Note
AO: Analog Output
X202: IO module terminal
572
Calculated: -
Scaling: PERCENT
Unit selection: -
Max:
-
Calculated: -
Scaling: -
Unit selection: -
Max:
- [%]
Calculated: -
Scaling: -
Unit selection: -
Max:
1000.0 [ms]
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Data type: Unsigned32 /
FloatingPoint32
Dynamic index: -
Function diagram: 2261
Factory setting:
[0] 21[0]
[1] 27[0]
[2] 0
Data type: FloatingPoint32
Dynamic index: -
Function diagram: 9572
Factory setting:
- [%]
Data type: FloatingPoint32
Dynamic index: -
Function diagram: 9572
Factory setting:
0.0 [ms]
SINAMICS G120X converter