Table of Contents
Advertisement
Parameters
7.2 Parameter list
Note
The switchover to daylight saving time only effects the RTC and DTC parameters (p8400 ... p8433).
When displaying the fault time and alarm time, the switchover to daylight saving time is not taken into account.
There must be at least two months between the start and end of daylight saving time.
For index 0:
0: daylight saving time switchover deactivated
1 ... 3: time difference
For indices 1 and 5:
1 = January, ... , 12 = December
For indices 2 and 6:
1 = from the 1st to the 7th of the month
2 = from the 8th to the 14th of the month
3 = from the 15th to the 21st of the month
4 = from the 22nd to the 28th of the month
6 = the last 7 days of the month
For indices 3 and 7:
1 = Monday, ... , 7 = Sunday
r8403
RTC actual daylight saving time difference / RTC act DST
Access level: 3
Can be changed: -
Unit group: -
Min:
-
Description:
Displays the actual time difference in hours for the daylight saving time
Note
The value is 0, if daylight saving time has not been defined using p8402.
If it is presently daylight saving time according to what is defined in p8402, then the parameter indicates the time
difference between daylight saving time and normal time (p8402[0]).
r8404
RTC weekday / RTC weekday
Access level: 3
Can be changed: -
Unit group: -
Min:
1
Description:
Displays the weekday on the real-time clock.
Value:
1:
2:
3:
4:
5:
6:
7:
Note
RTC: Real-time clock
868
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Calculated: -
Scaling: -
Unit selection: -
Max:
-
Calculated: -
Scaling: -
Unit selection: -
Max:
7
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Data type: Unsigned16
Dynamic index: -
Function diagram: -
Factory setting:
-
Data type: Integer16
Dynamic index: -
Function diagram: -
Factory setting:
-
SINAMICS G120X converter
Advertisement
Table of Contents
