Co: Technology Controller Setpoint After Ramp-Function Generator; Technology Controller Setpoint Filter Time Constant; Technology Controller Type / Tec_Ctrl Type; Ci: Technology Controller Actual Value / Tec_Ctrl Act Val - Siemens SINAMICS G120X Operating Instructions Manual

Parameters
7.2 Parameter list
Dependency: See also: p2257
Note
The ramp-down time is referred to 100 %.
r2260 CO: Technology controller setpoint after ramp-function generator / Tec_ctr set aftRFG
Access level: 2
Can be changed: -
Unit group: 9_1
Min:
- [%]
Description: Sets the setpoint after the ramp-function generator of the technology controller.
p2261 Technology controller setpoint filter time constant / Tec_ctrl set T
Access level: 3
Can be changed: T, U
Unit group: -
Min:
0.000 [s]
Description: Sets the time constant for the setpoint filter (PT1) of the technology controller.
r2262 CO: Technology controller setpoint after filter / Tec_ctr set aftFlt
Access level: 3
Can be changed: -
Unit group: 9_1
Min:
- [%]
Description: Display and connector output for the smoothed setpoint after the setpoint filter (PT1) of the technology controller.
p2263

Technology controller type / Tec_ctrl type

Access level: 3
Can be changed: T
Unit group: -
Min:
0
Description: Sets the type of technology controller.
Value: 0:
1:
p2264[0...n]

CI: Technology controller actual value / Tec_ctrl act val

Access level: 2
Can be changed: T, U
Unit group: -
Min:
-
Description: Sets the signal source for the actual value of the technology controller.
802
D component in the actual value signal
D component in system deviation
Calculated: -
Scaling: PERCENT
Unit selection: p0595
Max:
- [%]
Calculated: -
Scaling: -
Unit selection: -
Max:
60.000 [s]
Calculated: -
Scaling: PERCENT
Unit selection: p0595
Max:
- [%]
Calculated: -
Scaling: -
Unit selection: -
Max:
1
Calculated: -
Scaling: PERCENT
Unit selection: -
Max:
-
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Data type: FloatingPoint32
Dynamic index: -
Function diagram: 7958
Factory setting:
- [%]
Data type: FloatingPoint32
Dynamic index: -
Function diagram: 7958
Factory setting:
0.000 [s]
Data type: FloatingPoint32
Dynamic index: -
Function diagram: 7958
Factory setting:
- [%]
Data type: Integer16
Dynamic index: -
Function diagram: 7958
Factory setting:
0
Data type: Unsigned32 /
FloatingPoint32
Dynamic index: CDS, p0170
Function diagram: 7958
Factory setting:
0
SINAMICS G120X converter