Safely Remove The Memory Card - Siemens SINAMICS G120X Operating Instructions Manual

Infrastructure converter for hvac/water/wastewater

Hide thumbs Also See for SINAMICS G120X:

Table of Contents

Saving the settings and series commissioning

8.1 Memory card

Switch off the converter power supply.

Wait until all LEDs on the converter are dark.

Switch on the converter power supply again.

You have transferred the settings from the memory card to the converter.

Safely remove the memory card

Data loss from improper handling of the memory card

If you remove the memory card when the converter is switched on without implementing the

"safe removal" function you may destroy the file system on the memory card. The data on the

memory card are lost. The memory card will only function again after formatting.

● Only remove the memory card using the "safe removal" function.

Function description

Procedure with the BOP-2

You have now safely removed the memory card using BOP-2.

Start data transfer with OK.

Wait until the converter has transferred the settings from the memory card.

1. Set p9400 = 2.

If a memory card is inserted, p9400 = 1.

2. The converter sets p9400 = 3 or p9400 = 100.

● p9400 = 3: You may remove the memory card from the converter.

● p9400 = 100: You must not remove the memory card. Wait for several

seconds and then set p9400 = 2 again.

3. Remove the memory card. After removing the memory card, p9400 = 0.

Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC

SINAMICS G120X converter