Adapt The Default Setting Of The Terminal Strip - Siemens SINAMICS G120 Operating Instructions Manual

6.2.2

Adapt the default setting of the terminal strip

This chapter describes how you adapt the function of individual digital and analog inputs and
outputs of the inverter.
Not available with Control Units CU240B-2 and CU240B-2 DP
1)
Image 6-3
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
Internal interconnection of the inputs and outputs
Advanced commissioning
6.2 Inverter control
173