Table of Contents
Advertisement
Warnings, faults and system messages
9.2 System runtime
9.2
System runtime
Overview
By evaluating the system runtime of the converter, you can decide when you should replace
components subject to wear in time before they fail - such as fans, motors and gear units.
Function description
The system runtime is started as soon as the Control Unit power supply is switched-on. The
system runtime stops when the Control Unit is switched off.
The system runtime comprises r2114[0] (milliseconds) and r2114[1] (days):
System runtime = r2114[1] × days + r2114[0] × milliseconds
If r2114[0] has reached a value of 86,400,000 ms (24 hours), r2114[0] is set to the value 0 and
the value of r2114[1] is increased by 1.
Example
Parameter
r2114[0]
r2114[1]
You cannot reset the system runtime.
Parameters
Parameter
r2114[0 ... 1]
962
Description
Total system runtime
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC
Description
System runtime (ms)
System runtime (days)
SINAMICS G120X converter
Factory setting
-
Advertisement
Table of Contents
