Transmission Driveshaft (Machine Serial Numbers Below 316000000) - Toro Groundsmaster 3280-D Service Manual

Transmission Driveshaft (Machine Serial Numbers below
316000000)
g230811
1. Driveshaft
2. Conelock nut
3. Flat washer
4. Rubber coupling
5. Coupling spacer
Removing the Transmission Driveshaft
Groundsmaster ® 3280-D/3320
05138SL Rev B
6. Bolt
7. Square-head screw (2 each)
8. Coupling spacer
9. Pump hub
10. Bolt
1. Park the machine on a level surface, engage parking brake, lower cutting
deck (or implement), and shut off the engine. Remove key from the key
switch.
2. Remove conelock nuts, flat washers, and bolts that secure rubber coupling to
pump hub (item 9 in
3. Remove bolts (item 12 in
secure rubber coupling to engine hub. Remove coupling spacers.
4. Remove driveshaft assembly from machine.
5. Remove conelock nuts (item 2 in
secure driveshaft to rubber couplings.
6. Inspect rubber couplings and replace if cracked or damaged.
Figure 79
11.
12.
13.
Figure 79). Remove coupling spacers.
Figure 79), lock washers, and flat washers that
Figure 79), coupling spacers, and bolts that
Page 5–87
Transmission
Bolt
Lock washer
Hydraulic System: Service and Repairs