Toro Groundsmaster 3280-D Service Manual page 367

Disassembling the Front Axle (continued)
Groundsmaster ® 3280-D/3320
05138SL Rev B
g225910
6. Do not remove the bearings from the differential case unless there is a
bearing failure. Whenever the bearings are removed (regardless of usage)
they must be replaced with new ones. Remove the case side bearing with a
puller as shown in
If the bearings are removed from the differential case, locate and retrieve the
shims from the case. For assembly purposes, note the location of the shim.
g225911
To prevent personal injury, always wear a face shield or safety
goggles when striking a drift punch with a hammer.
7. Put the case in a vise. Drive the lock pin out of the pinion mate shaft
220). Use a small drift punch.
Figure 219
Figure 219.
Figure 220
WARNING
Page 8–25
(Figure
Drive Axles: Service and Repairs