Installing the Rear Axle Driveshaft (4-Wheel Drive)
Drive Axles: Service and Repairs
If the driveshaft tube and shaft were separated, ensure that the
driveshaft yokes are aligned when the tube and shaft are assembled
(Figure
253). Misalignment of the yokes will result in shortened
driveshaft life and will cause unnecessary vibration.
1. Position the rear axle driveshaft to the machine. Ensure that the driveshaft
tube (item 10 in
Figure
2. Secure the yokes of the driveshaft to the front axle flange and bi-directional
clutch with the fasteners that are previously removed.
3. Lubricate the driveshaft grease fittings; refer to the Traction Unit Operator's
Manual.
IMPORTANT
253) is toward the rear axle.
Page 8–44
Groundsmaster
®
3280-D/3320
05138SL Rev B