Toro Groundsmaster 3280-D Service Manual page 155

Test Procedure (continued)
Groundsmaster ® 3280-D/3320
05138SL Rev B
B. The charge pump is worn and should be repaired or replaced; refer
to Servicing the Hydraulic Pump (Machine Serial Number above
316000000) (page
14. After you complete the testing, shut off the engine, and then release pressure
from the hydraulic system; refer to
System (page 5–6).
15. Disconnect the tester, and connect the removed hydraulic tube.
16. Install the seat plate, lower and secure the operator seat.
17. Start the engine, check for hydraulic-fluid leaks, repair any leaks as required,
and fill the hydraulic reservoir (front axle) with the correct quantity of new
hydraulic fluid before returning the machine to service.
5–103).
Releasing Pressure from the Hydraulic
Page 5–71 Hydraulic System: Testing the Hydraulic System